Click for oil centrifuge videos
Oil Centrifuge Specifications:
The oil centrifuge has a flow rate capacity of .93 GPM or 55 gallons per hour. The oil centrifuge measures 4" in diameter by 6.5" tall. Rotor is capable of holding 10.5 oz. of contaminants. One 55 gallon drum of waste oil will take approximately 60 minutes to process. The viscosity is the critical part of this equation. Oil cleaning centrifuge generates at 85 PSI a centrifugal force 2,000 times greater than gravity at 7500 RPM. You need to purchase a 1/3HP motor with pump for waste oil centrifuge operation. The oil centrifuge will filter waste vegetable oil, filter waste motor oil, filter hydraulic oil, filter gear oil or dewater biodiesel and waste vegetable oil dewatering. Oil centrifuge filtering will remove magnesol with more than one pass necessary. At the end of the process, you can also remove glycerin, which requires no heating. More than one pass may be needed. You can build a wvo filtration system with this unit.
The waste oil centrifuge is the best filter unit for waste vegetable oil, waste motor oil, gear oil, lube oil, or transmission fluid. Centrifuge filtering can clean your oil to below .5 micron and dewater your oil. Oil centrifuges need a gear pump for operation and a drum heater for thinning the oil. Centrifuge waste vegetable oil for wvo diesel.
All internal centrifuge parts certified nickel plated to prevent rust and corrosion.
5 Year Warranty with guaranteed full factory service
Canada $42.00 All other countries $62.00
Visit our other sites for:
Heating Products: www.jmazecorp.com
Diesel Centrifuges: www.centrifugeoilfiltration.com