AWS 1500 -process 400 GPH
Scope of Supply:
Centrifugal Oil Cleaner Model SCC 200, can process 400 GPH with 67oz. contaminant holding capability. 1.5 HP Motor with 8 GPM Integral Pump, Contactor O / L Relay, MCB, Hour Meter, Pressure Gauge, Service Indication timer with Flasher / Buzzer and Auto Switch Off Facility (to automatically switch off the unit after required number of hours), Wheels, antivibration Mounts (AVM), Over Pressure Safety Switch, Suction and Drain Hose, Y Strainer etc
Extra Maintenance Spares:
Centrifuge O Rings, Pump Oil Seal, Rotor Holding / Opening Tool, Y Strainer Opening Tool, Rotor Cleaning Tray.
Complete skid mounted portable unit.
Centrifugal Oil Cleaner Working Principle
Centrifugal Oil Cleaner operates on the reaction turbine principle. Oil enters the Centrifuge under pressure and passes into the rotor through hollow rotor shaft. The oil pressure and flow is converted in rotational energy as the oil pressure and flow is converted in rotational energy as the oil escapes through the jets, producing speed upto 7000 RPM & above. The resultant Centrifugal force removes dirt from the engine oil depositing it on the inner wall of rotor in dense cake form. Clean oil drains back directly to the engine oil sump by gravity.
• No Replacement Element
• No Recurring Cost
• Extended Oil Change Period
• Finest Filtration to 1 µ & below
• Substantial Savings on Equipment Operating & Maintenance Expenses
• Aluminium Wire Drawing
• Nut/Bolt Forming
• Cold Forming
• Gear boxes, Rolling Mills
• Honing, Reaming, Grinding
• Cement Mills
• Turbine Oil, Gear Oil
• Transmission Oil, Hydraulic Oil
• Compressor Oil, Test Bed Oils
• Straight Cutting Oil